1. Prevent electromagnetic and other environmental interference

Special attention should be paid to electromagnetic interference protection for card readers used in channel gates.If conditions permit, the card reader shall be installed at an interval of more than 30cm from the strong power supply.

2. Prevent the attenuation of transmitted signals

The installation of channel gate and access control controller should take into account the distance between controller and card reader. The ideal transmission interval is within 50m.For signal transmission cables, it is necessary to consider the signal attenuation caused by cable shielding and distant transmission, and make sure to make reliable grounding during pipeline construction.

3. Debugging of access control controller and system software

System debugging is an important link to ensure the quality of the gate control system.The key point lies in the debugging of access control controller and the operation of system software. Besides the input of card reader, the function of controller is to set the linkage output function of relay according to the actual needs.

4, a credit card

Channel gate in use, is the right hand card, and induction zone parallel, from the induction zone 20-50mm is the best, hear the sound of "di" has been proved to have swiped the card to open the gate need to pass immediately, do not stay in the channel, facilitate to improve the passage rate.

5, Traffic attention

In the process of passage, must not follow into the channel.Do not force the door to open, so as not to hurt people, the front personnel has passed the middle point, the back personnel can swipe the card, swipe the card will be effective there will be indicator light and the door will open automatically.

6. Clean up regularly

Access gates require constant maintenance.Periodically clean the internal and external dust of the chassis to ensure the normal operation of the equipment. Immediately notify the management department of any machine failure for maintenance, or contact the manufacturer for maintenance.